Application Condition
Environmental Temperature: 5℃～40℃
Relative Humidity:30%～80%
Atmospheric Pressure:700hpa～1060 hpa
Type
|
Type |
Pressure（kpa） |
Volume(L) |
|
SM-35 |
10.6 |
35 |
|
SM-42 |
10.6 |
42 |
|
SM-50 |
10.6 |
50 |
Directions
1. Feed air before you first use it. Get the Oxygen-carrying pipe upside-down and pat it to clear up the partitions with air.
2.Warning：Air-feeding limit is 10.6kPa. Never over the limited pressure otherwise the service life would become shorter or the oxygen bag even would burst.
3. Immerse the tip of the oxygen carrying pipe into water and loosen the joint slowly. After air bubbles are discharged continuously it is time for the patient to breathe. Oxygen reduces as the pressure falls down during you using it. Press oxygen bag outside or lose the joint of the oxygen-carrying pipe to adjust the amount of oxygen.
4. Make sure to tightly bind the joint when out of use. 5. Keep a small amount of air in the oxygen bag to prevent rubberized fabric from conglutinating. Away from light, heat, protrusions, chemical substances and extrusion. |
Products 